|
AMES'
SUPER PRIMER
A 100% pure acrylic plastic sealant
Super Primer is a unique, pure acrylic
elastomeric plastic sealant, primer and adhesive for
concrete, brick, tile, EPDM rubber, stucco,
wood, metal, and many hard-to-stick surfaces. It leaves
a clear and slightly tacky surface that substantially
increases adhesion for Ames' coatings. Much more powerful
than a water repellant, Super Primer seals against water
damage and seepage while penetrating deeply into the
surface to strengthen and bind together the molecules
of the surface it is applied to. Super Primer helps
stop concrete efflorescence, and blocks most gasses
penetrating concrete, mortar, or stucco. Super Primer
is elastic and highly resistant to cracking and peeling
as the surface expands and contracts ~ even at -35 degrees
F. It is easy to use, environmentally friendly, water-base,
nearly odorless, non-flammable, and VOC free. Simply
brush, roll or spray. Clean up with water.
| Project |
Topcoat
with: |
| Above-Grade
Walls |
Ames' Paint & Prime,
or Block & Wall acrylic formula |
| Below-Grade
Walls |
Ames' Vapor-Barrier or
Block & Wall rubber formula |
| EPDM Roofs |
Ames' Super Elasto-Barrier,
Maximum-Stretch or both |
| Stucco |
Ames' Paint & Prime |
| Concrete
Floors |
Ames' Safe-T-Deck non-skid,
Safe-T-Deck plastic paint or Liquid Granite |
Super
Primer is used as a concrete additive
When added to the water of a concrete mix at 25% ratio,
Super Primer substantially reduces cracking in concrete
and increases crush strength from an estimated 2800
PSI to 8800 PSI. Seamless concrete polymerized with
Super Primer will be impervious to water penetration
and will prevent efflorescence. Coatings will have substantially
better adhesion to concrete that has been strengthened
by Super Primer. The set time will speed up, and the
long-term cure time will be reduced from an estimated
28 days to 22 days at 70 degrees F ambient temperature.
Important: The user should always run a test batch when
polymerizing concrete to determine the saturation ratio
or proportions that work best in their application.
Super
Primer may be added to latex coatings to increase adhesion.
Super Primer is a useful additive to such products when
the surface is chalking or deteriorating. The approximate
ratio is up to one pint Super Primer to one gallon coating.
Run a test patch to determine that you have the proper
ratio to successfully complete your application.
Super Primer is water-base, nearly odorless, non-flammable
and contains no dangerous pesticides. Super Primer may
be applied to most previously coated surfaces.
Coverage:
Covers up to 500 to 1,000 square feet per five when
used as a coating
|
